Delta PLC Training For Bangladesh

Why Delta PLC training for Bangladesh?

Though Bangladesh is a small country, it has a vast population. In Bangladesh, there is a lot of industry. There most of the machine is run, processes by Programmable Logic Controller (PLC). Maximum industry recruits automation engineer, an electrical engineer who has sound knowledge about PLC. Because of the huge number of industries, they need a huge number of automation engineers/electrical engineers. So, if anybody does Delta PLC training in Bangladesh, it will be a great asset for him/her. And anybody can make their future remarkable by doing this Delta PLC training in Bangladesh. And they can lead their career brightly in their rest of life.

Introduction to Delta PLC

The Delta Programmable Logic Controller is often referred to as a small industrial computer. It is manufactured by China. Delta PLC consists of software and hardware which are used to performs in control systems. However, a Delta Programmable Logic Controller can be used in industrial automation electromechanical processes, for example, control of machinery on factory assembles lines, food processing or packaging, satisfaction rides, etc. The Delta PLC is designed in such a way that, it can arrange multiple digital and analog inputs, outputs. The Delta programmable logic controllers are also designed with an extended temperature range when running the Delta PLC there will no sound that occurs, also there will less vibrant.

Components of Delta PLC

A Delta programmable logic controller has two basic sections. They are the Central Processing Unit (CPU) and the Input/Output (I/O) modules. These two components explained below

Central Processing Unit (CPU) of Delta PLC

In a Delta PLC, the Central Processing unit controls all systems through its systems memory and processor. The Delta PLC CPU contains a microprocessor, others integrated circuit, and memory chip. All these components need to control logics, communications, and monitoring. The Delta PLC have different operating modes. In a programming language, the CPU  accepts the changes of programming language, which programming language is downloaded from a PC. When the CPU is settled in a run mode it will execute the program and also help to operate the whole process.

Input Data & Program execution Central Processing Unit (CPU)

In Delta PLC, there is a need for input data. This input data is from ground connected devices. After given input, the CPU executes the control program which has been stored in the system memory. The Delta PLC process this same program over and over again until the stored program change again. To complete one cycle through the program it takes some time, this time is called scan time, and this is happening too quickly.

Input/Output (I/O) Interfaces system

The input/output systems have been attached with a grounded device and this one provides the interfaces between the CPU and its input/output device. When the CPU processes input data, the I/O interface systems can make any output changes if needed after executing the user program. In the operation of Delta PLC, there are 4 basic steps: Input Scan, Program Scan, Output Scan, and Housekeeping.

Input Scan

The applications of an input scan in a Delta PLC device is, to detects the stats of all input devices that are connected to the Delta programmable logic controller.

Program Scan

In Delta PLC, a program scan helps to run the user-created logic program.

Output Scan

Load or reloaded all output devices that are connected to Delta PLC.

Housekeeping

The role of the housekeeping in the Delta PLC is an internal check on speed, memory, and operation. It is also servicing any kind of communication requests.

Advantages of Delta PLC

There are a lot of advantages of using Delta programmable logic controllers in the industrial automation sector. The Delta programmable logic controllers give opportunities to the mechanical systems that are the processing time of Delta PLC is too fast, and it also offers reliable and highly stable applications in all industrial automation machines. Because of Delta PLCs fast operation, variety of functions card, plentiful instructions, the cost-effective Delta programmable logic controllers backing a variety of communication protocols, human-machine interface, servo, connecting Delta AC motor drive, and temperature controller with industrial network into a complete Delta Programmable Logic Controller (PLC) for all industrial automation users.

Models of Delta PLC

In Delta Programmable Logic Controllers (PLC) there is no type of Delta PLC, though there is a lot of series in Delta programmable logic controllers. These series are EH2, PM, 10 PM, ES2, SV2, SV, EX, ES, SS2, etc.

EH2 series of Delta PLC

EH2 series maintains good operational speed, and it also offers built-in applications, large programming capacity, communications instructions, a variety of special extension modules and function cards. The EH2 models of Delta PLC have also enabled the quality of MPU to be utilized to its fullness.

Specifications of EH2:

• The model of EH2 has MPU points 16/20/32/40/48/64/80.
• It contains a maximum of 512 I/O points.
• The program capacity of this model is 16K steps.
• Instruction performance speed 0.24µS.
• It has a kind of these communication ports, which are: Built-in RS-232 and RS-485, and these communication ports are compatible with RTU communication protocol or MODBUS ASCII.
• It also contains high-speed pulse output. 20 points and 32 points models support 2 points 200KHz pulse output, 40 points models support 200 KHz pulse output.

Applications of EH2 series

The EH2 series of Delta PLCs is basically used in industrial applications very much. Especially it is used in the industrial production line. The main application of the series is high speed cutting machine, a bar feeder, a distributed monitor system, high speed 3 axis welding machine in the industrial production line.

PM series of Delta PLC

The advance control PM series is basically known as advance motion control MPU. And it can become the motion extension module of another PM series MPU. PM series of Delta PLC is very flexible for all kinds of industrial automation applications.

Specifications of PM series

1. MPU points are 16.
2. The PM series of Delta PLC contains a maximum of 512 I/O points.
3. It has the ability of program steps is 64k.
4. It has a high-speed pulse output, which is 500KHz.
5. It supports multi-point external signal inputs and Manual Pulse Generator (MPG).
6. Positioning control, material cutting machine, crane operations, material clipper.

ES2 series of Delta PLC

The ES2 series of Delta PLC is a small PLC, and it is made for basic sequential control. It is profitable, highly efficient, and functional.

Specifications of ES2 series

1. The MPU points of ES2 series are 16 / 20 / 24 / 32 / 40 / 60.
2. The program capacity of this series is 16k steps.
3. This ES2 series Built-in with 3 COM ports: 1 RS-232 port and 2 RS-485 ports, these all communication ports can operate freely.
4. It consists of a maximum of 256 Input points and 16 Output points or 256 output points and 16 Input points.
5. It contains 8 high-speed input points. Where 2 points for 100KHz, and 6 points for 10KHz. It also supports several kinds of counting modes which are U/D, U/D air, A/B counting modes.

The SV series of Delta PLC model

The slim and compact SV series offers larger program capacity and operation frequency. It can be compared to the standard Delta PLC.

Specifications of SV series

1. There is 12 number of MPU points.
2. The maximum numbers of I/O points are 236.
3. It has the program capacity almost 8k.
4. The communication ports, which are RS-232 and RS-485.

Applications of SV series

It is used in the industrial production line. Container filler, dying machine, printing machine, work station monitoring, etc.

What you’ll learn

• The Delta PLC training course helps you to learn briefly about this information which is given below:
• Introduction of Delta PLC.
• Functions and Features of Delta PLC.
• What is Sinks and Source concept?
• Working Principle of PLC
• Wiring Connection and Communication of PLC.
• Bit Logic with Interlocking and Holding Concept.
• Timer, Counter, Compareinstruction, Math instructions, Move instructions and Program Control instructions, etc.
• And many more instructions are covering in course.
• Problems with Solution (Industrial Level).

Who is Eligible for Delta PLC Training?

Students who are studying or having a Diploma/Bachelor/Master’s degree in EEE/ETE/ECE. Whom is actually doing work in the automation factory but they do not know briefly about PLC, they are also warmly welcome for this Delta PLC training course. This Delta PLC training course will make their professional life more enjoyable than before. This training course is also important for application engineers, maintenance engineers, PLC programmers, etc.

More details